sábado, 9 de agosto de 2014

How to Install Under Cabinet Lighting




Have you ever found yourself in your kitchen squinting at your favorite cookbook? Maybe you were searching for a utensil, or re-cleaning already washed dishes. Sometimes there just isn't enough lighting to see what you are doing. You might consider installing lighting under overhead cabinets. Many times cabinets create a shadow. This causes your counter top work areas to become dark and hard to work in. This usually happens when ceiling lights are placed close to the cabinets. Under cabinet lighting is not just for kitchens. It can be used anywhere this is a problem.

Strip Light
Under cabinet lighting is available in halogen or fluorescent strips. It also comes in individual halogen "puck" lights. Both of these are easy to install. Halogen lighting is closer to natural light. Fluorescent strips are less expensive. Strip light is used to illuminate a large space. Individual puck lighting can be used in small spaces or where not a lot of light is required.

Under cabinet puck lighting is able to be placed individually wherever extra light is needed. The units are then strung (wired) together and attached to a transformer which can be plugged into an outlet. The transformer is needed to convert your regular 120 volt ac to 12 volt dc. The wiring comes with the units and is a very simple snap in design. Strip type lighting is a little more complicated to install, but considerably brighter.

When installing strip light plug the light in and check different positions. See that your lighting is where you need it to be. When you decide the best location for your light, mark the holes where your mounting hardware will be installed. The maker of your under cabinet lighting will give you directions for accomplishing this task. A template is normally enclosed for this specific purpose.

Once your screw holes are marked you will want to pre-drill your holes. Position your hardware so that the holes are visible and put in your screws. Mount your under cabinet strip lighting onto the hardware as instructed. After you are finished with installation take a look at your work. If you are not pleased with the appearance you can disguise the lighting using a strip of wood, which has been finished to match your cabinets. Be sure to use this along your whole cabinet front for a uniform look.